Lexmark 20E Photo Printer User Manual


 
E-mailing
Your can use your printer to send e-mail to one or more recipients without using a computer. To do this, you can either
scan a document or photo and then send it as an e-mail, or you can attach a saved document or photo from a memory
device to an e-mail.
Before you can send e-mail using the printer control panel, you must first configure the e-mail settings of your printer.
Setting up the printer to e-mail
Setting up the email function
1 From the home screen, navigate to:
> Email Setup > Yes
2 Enter your email address, and then touch OK.
The printer compares your email address to the list of known email providers.
3
Follow the prompts on the display:
If your email address matches one of the domains on the list, then the printer automatically assigns the SMTP
server settings.
Note: You may be required to enter your email user name and password, depending on the email address
you entered.
If the email domain is not known, then the Advanced Email Setup Wizard appears on the display.
Enter the necessary information. Touch OK or Accept to save each item.
Changing the email settings after setup
If you want to change the SMTP server settings
1
From the home screen, touch > Email Setup > SMTP Setup.
2
Touch each item to enter the necessary information. Touch OK or Accept to save each item.
Server—Enter the name or address of the SMTP server.
Port—Enter the SMTP port.
Use SSL/TLS—Select how the email client and the SMTP server use encryption when sending emails.
Authentication—Select the authentication type for your email account. If you select None, then you will not
be required to enter the User Name and Password. For more information, contact your e-mail provider or your
system support person.
Note:
The Authentication screen may not appear on the display, depending on the email address you
entered during email setup.
Sender's Name—Enter your name.
User Name—Enter your email address.
E-mailing 69