170
9
Appendix
Troubleshooting
Problem Cause Remedy
Cannot insert
SD Memory
Card in
camera
Protective card has
been inserted in
camera
Dummy card is inserted in SD
Memory Card socket when camera
leaves factory to protect socket from
scratches and dust. Remove dummy
card from camera before inserting
SD Memory Card.
Camera will
not turn on
Battery is not
installed
Check if battery is installed. If not,
install battery.
Battery is installed
incorrectly
Check orientation of battery.
Reinsert battery according to +-
symbols. (p.16)
Battery power is low Charge the battery.
No image on
LCD monitor
Camera is connected
to a PC
LCD monitor is off when camera is
connected to a computer.
Camera is connected
to a TV
LCD monitor is off when camera is
connected to a TV.
LCD monitor is set to
OFF
Press the 4 button to turn LCD
monitor on. (p.73)
Image is displayed
but is hard to see
Image on LCD monitor may be hard
to see when taking pictures outside
in sunlight. Increase brightness of
LCD monitor. (p.152)
Shutter will
not release
Flash is charging
Pictures cannot be taken while the
flash is charging. Wait until charging
is finished.
No available space
on SD Memory Card
Insert SD Memory Card with
available space or delete unwanted
images. (p.20, p.111)
Recording Wait until recording is finished.