Filter
Top Products
86
4
Taking Pictures
R q < I A F > ; S B J K E \ ^ C
You can choose which part of the screen to use to measure the
brightness and determine the exposure. The default setting is L (multi-
segment).
AE Metering
1 Press the 3 button in A mode or C mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [AE Metering].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to change the AE Metering mode.
5 Press the shutter release button
halfway.
The AE Metering setting is saved and the
camera returns to capture status.
Refer to Step 6 of “How to Use the Menus” (p.45) for other operations
after the setting has been made.
Setting the Light Metering Range to Determine
the Exposure (AE Metering)
L
Multi-segment The exposure is determined by the entire screen.
M
Center-weighted
The exposure is determined mainly by the center of the
screen.
N
Spot
The exposure is determined by the small area in the
center of the screen only.
Saving the AE Metering Mode 1p.92
MENU
2560
×
1920
My
Recorded Pixels
Quality Level
White Balance
Multiple
AF Setting
AE Metering
Sensitivity Auto
Rec. Mode
Exit
MENU
5
2, 3, 4
1
OKMENU
OK
2560
×
1920
My
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
Rec. Mode
Cancel