Filter
Top Products
16
1
Getting Started
Powering the Camera
The battery for this camera is included in the package. Insert the battery
in the camera and then place the camera on the USB cradle to charge
the battery.
1 Press the battery cover button on the side of the LCD
monitor.
Swivel the lens section of the camera to expose the battery cover
button.
2 Hold the button down and slide the battery cover in the
direction of the arrow.
Remove the battery cover from the camera.
3 Insert the battery so that the 2 symbol is pointing
toward the lens.
Make sure that the battery tape protrudes from between the camera
and the battery. The battery tape is useful for removing the battery and
should not be pushed out of sight under the battery.
Installing the Battery
Do not pull the battery cover up with too much force while sliding it
off. Doing so may damage the battery cover.
2
1
3
Remove the battery cover Insert the battery
Battery cover button
Battery tape
Serial number
* The serial number can be found on the camera
once the battery cover has been removed.