Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 988
i In the Outbound Proxy Servers table, the Port field must be set to 5061. (The same value as
entered in Step g.)
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments
4 Set the ITP_CERTIFICATION System Flag to YES.
When set to NO (default), this flag disables the Telepresence features in the Conference Profile.
5 Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag.
The MIN_TIP_COMPATIBILITY_LINE_RATE System Flag determines the minimum line rate at
which a Profile can be TIP enabled.
CTS version 1.7 requires a minimum line rate of 1024 kbps and will reject calls at lower line rates,
therefore the System Flag value must be 1024 or higher.
6 If required, manually add and set the FORCE_720P_2048_FOR_PLCM_TIP System Flag using
one of the following values:
FORCE_720P_2048_FOR_PLCM_TIP (Default) - Forces HD 720p video resolution and a line rate
of 2048kbps for all Polycom TIP-enabled endpoints that connect to the TIP-enabled Telepresence
conference. This setting is the recommended setting.
FORCE_2048_FOR_PLCM_TIP - Forces a line rate of 2048kbps for all Polycom TIP-enabled
endpoints connecting to the TIP-enabled Telepresence conference.
NO_FORCE - No forcing is applied and Polycom TIP-enabled endpoints can connect to the
TIP-enabled Telepresence conference at any line rate or resolution.
7 Reset the Collaboration Server.
8 For more information see .
9 Register the DMA to the Lync server
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments
10 Register the ITP endpoints to the Lync server