Polycom 1800 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 702
Defining the SNMP Parameters in the Collaboration Server
The SNMP option is enabled via the Collaboration Server Web Client application.
The addresses of the Managers monitoring the MCU and other security information are defined in the
Collaboration Server Web Client application and are saved on the MCU’s hard disk. Only users defined as
Administrator can define or modify the SNMP security parameters in the Collaboration Server Web Client
application.
To enable SNMP option:
1 In the Collaboration Server Web Client menu bar, click Setup > SNMP.
The RMX SNMP Properties - Agent dialog box is displayed.
This dialog box is used to define the basic information for this MCU that will be used by the SNMP
system to identify it.
2 In the Agent dialog box, click the SNMP Enabled check box.
3 Click the Retrieve MIB Files button to obtain a file that lists the MIBs that define the properties of
the object being managed.
The Retrieve MIB Files dialog box is displayed.
4 Click the Browse button and navigate to the desired directory to save the MIB files.
5 Click OK.
The path of the selected directory is displayed in the Retrieve MIB Files dialog box.
6 Click the Save button.
The MIB files are saved to the selected directory.
7 Click Close to exit the Retrieve MIB Files dialog box.
8 In the Agent dialog box, define the parameters that allow the SNMP Management System and its
user to easily identify the MCU.