Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 400
Routing Name The ASCII name of the conference. It can be used by H.323 and SIP
participants for dialing in directly to the conference. It is used to register the
conference in the gatekeeper and the SIP server.
Conferencing Mode The conferencing mode set for the conference: CP, VSW, SVC only or CP and
SVC.
Start Time The time the conference started.
End Time The expected conference end time.
Note: This field is not shown when the conference is set as a Permanent
Conference.
Conference Password A numeric password for participants to access the conference.
Chairperson Password A numeric password used by participants to identify themselves as the
conference chairperson.
ID The conference ID.
Profile The name of the conference Profile from which conference parameters were
taken.
Line Rate The maximum transfer rate, in kilobytes per second (Kbps) of the call (video
and audio streams).
Video Switching When selected, the conference is running in a special conferencing mode
which implies that all participants must connect at the same line rate and the
video parameters are set according to the highest common parameters.
Participants with endpoints not supporting the video parameters (such as the
video protocol, resolution and frame rate) selected for the conference will
connect as secondary (audio only). If HD 1080p is selected for the conference,
endpoints that do not support HD 1080p resolution are connected as
Secondary (Audio Only) participants.
Video layout changes are not enabled during a conference.
Note: Video Switching conferencing mode is unavailable to ISDN participants.
For more information, see Video Switching (VSW) Conferencing.
Reserve Resources for
Video Participants
Displays the number of video participants for which the system reserved
resources.
Default: 0 participants.
Reserve Resources for
Audio Participants
Displays the number of audio participants for which the system reserved
resources.
Default: 0 participants.
Max Number of
Participants
Indicates the total number of participants that can be connected to the
conference. The Automatic setting indicates the maximum number of
participants that can be connected to the MCU according to resource
availability.
Conference Properties - General
Field Description