Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 438
The Connected Media and Channels Used fields of an Audio Only participant are displayed as
follows:
ISDN/PSTN Participant Properties - Channel Status
Field Description
Connected Media Indicates if the participant is connected with Audio, Video and
Content media channels.
Channels Used •Channel – Indicates the channel used by the participants and
whether the channel is connected (indicated with a check mark) or
disconnected.
• Participant Phone Number – In a dial-in connection, indicates the
participant’s CLI (Calling Line Identification) as identified by the
MCU.
In a dial-out connection, indicates the participant’s phone number
dialed by the MCU for each channel.
• MCU Phone Number – In a dial-in connection, indicates the MCU
number dialed by the participant.
In a dial-out connection, indicates the MCU (CLI) number as seen
by the participant. This is the number entered in the MCU Number
field in the Network Service.
Tx - Video Sync Loss When checked, indicates a video synchronization problem in the
outgoing channel from the MCU.
The counter indicates the sync-loss count.
Rx - Video Sync Loss When checked, indicates a video synchronization problem in the
incoming channel from the endpoint.
The counter indicates the sync-loss count.
Content Token A check mark indicates that the participant is the current holder of the
Content Token.