RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 94
New SVC Profile - Advanced Parameters
Field/Option Description
Encryption Select the Encryption option for the conference:
•Encrypt All - Encryption is enabled for the conference and all conference
participants must be encrypted.
• No Encryption - Encryption is disabled for the conference.
• Encrypt when Possible - enables the negotiation between the MCU and the
endpoints and let the MCU connect the participants according to their
capabilities, where encryption is the preferred setting. For connection guidelines
see Mixing Encrypted and Non-encrypted Endpoints in one Conference.
For more information, see Packet Loss Compensation (LPR and DBA) AVC CP
Conferences.
Auto Terminate When selected (default), the conference automatically ends when the termination
conditions are met:
• Before First Joins — No participant has connected to a conference during the
n minutes after it started. Default idle time is 10 minutes.
• At the End - After Last participant Quits — All the participants have
disconnected from the conference and the conference is idle (empty) for the
predefined time period. Default idle time is 1 minute.
• At the End - When Last Participant Remains — Only one participant is still
connected to the conference for the predefined time period (excluding the
recording link which is not considered a participant when this option is selected).
It is not recommended to select this option for SVC Conferences. Default idle
time is 1 minute.
Exclusive Content
Mode
When selected, Content broadcasting is limited to one participant preventing other
participants from interrupting the Content broadcasting while it is active. For more
details, see
FW NAT Keep Alive When selected, a FW NAT Keep Alive message is sent at an interval defined in the
field below the check box.
Interval The time in seconds between FW NAT Keep Alive messages.