Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 770
ENABLE_CISCO_GK When set to YES, it enables the use of an identical prefix for different
Collaboration Servers when registering with a Cisco MCM Gatekeeper.
Default: NO.
ENABLE_CLOSED_CAPTION Enables or disables the Closed Captions option that allow endpoints to
endpoints to provide real-time text transcriptions or language
translations of the video conference.
When set to NO (default), Closed Captions are disabled.
When set to YES, Closed Captions are enabled.
ENABLE_EPC When set to YES (default), enables Polycom proprietary People+.
When set to NO, disables this feature for all conferences and
participants.
ENABLE_FLOW_CONTROL_REI
NVITE
Used to enable or disable sending a re-INVITE to endpoints to adjust
their data rate. When set to YES, re-INVITE is used for endpoints that
do not support flow control in SIP using either the Information or RTCP
Feedback mechanisms.
Default: NO.
ENABLE_EXTERNAL_DB_ACCE
SS
If YES, the Collaboration Server connects to an external database
application, to validate the participant’s right to start a new conference
or access a conference.
Default: NO
ENABLE_H239 When set to YES, Content is sent via a separate Content channel.
Endpoints that do not support H.239 Content sharing will not be able to
receive
When set to NO, the Content channel is closed. In such a case, H.239
Content is sent via the video channel (“people” video) enabling
endpoints that do not support H.239 Content sharing to receive the
Content in their video channel.
Default: YES.
ENABLE_H239_ANNEX_T In H.239-enabled MIH Cascading, when MGC is on level 1, enables
sending Content using Annex T.
ENABLE_IP_REDIAL In all versions up to version 7.0, when set to YES (default), it enables
re-dialing if H.323 or SIP dial out calls fail.
In version 7.0 and later, this flag functionality is replaced by the Auto
Redialing check box in the Profile Properties - Advanced dialog box
ENABLE_LYNC_RTCP_INTRA When set to YES, RTCP FIR is used for sending Intra Requests. When
set to NO Intra Requests are sent using SIP INFO Messages.
Range: YES / NO
Default: NO
Manually Added, Modified, Deleted System Flags
Flag Description