Filter
Top Products
5-9
Monitoring and Configuring the Printer | 5-9
You can use the
+
or
–
button to cycle through all three settings.
3. When you select the setting you want, press the
Enter
button to save it.
Then press the
SelecType
button to exit the Printer Setting menu.
Turning Off Paper Monitoring Features
The printer normally stops and displays an error message if you try to print
an image wider than the paper, or if paper is fed at an angle. You can turn off
the paper size check and/or paper alignment check if you don’t want to use
these monitoring features. However, ink may be sprayed on the platen if you
print an image that is too wide for the paper. Follow these steps to turn off
paper monitoring:
1. Press the
SelecType
button.
PRINTER SETTING MENU
appears on
the display.
2. Press the
Item
button repeatedly until
PAPER SIZE CHK=ON
or
PAPER ALIGN CHK=ON
appears on the display.
3. Press the
+
button.
PAPER SIZE CHK=OFF
or
PAPER ALIGN
CHK=OFF
appears on the display.
4. Press the
Enter
button to save your new setting.
5. Press the
SelecType
button to exit the Printer Setting menu.
Selecting the Printer’s Interface
The printer includes three interfaces: parallel, USB, and FireWire. You can
also install an optional interface card for networking. By default, the printer
automatically switches to whichever interface is receiving data.
You can use the control panel to select an individual interface for sending
data to the printer. Follow these steps:
1. Press the
SelecType
button.
PRINTER SETTING MENU
appears on
the display.