Filter
Top Products
6-15
Maintaining and Transporting the Printer | 6-15
6. If the outer case is dirty, clean it with a soft, clean cloth dampened with
mild detergent. Keep the ink cartridge compartment closed to prevent
water from getting inside.
7. If the area under the roll paper cover accidentally gets soiled with ink,
wipe it off with a damp cloth.
8. To wash the paper hammock, remove the shafts, then machine wash
with mild detergent and air dry.
Transporting or Storing the Printer
Follow these guidelines for transporting or storing the printer:
•
Contact EPSON if you need to store your printer for an extended
period (two years for the Photographic Dye Ink model, or six months
for the Archival Ink model). See page 4 for contact information. A
service technician must drain all ink from the printer before it is stored.
•
To ship your printer, you should repack the printer using the original
box and packing materials, and you may need to drain the ink from the
printer. Follow the instructions below to prepare the printer for
shipment.
•
If you are moving the printer a short distance (for example, in the same
building), you can move the printer on its stand. Follow the instructions
on page 6-17.
Preparing the Printer for Shipment
Follow the steps below to prepare the printer for shipment:
1. First turn off the printer and make sure the print head is in the home
(far right) position. If not, turn the printer back on, wait until the print
head moves to the home position, then turn off the printer.