Filter
Top Products
2-9
Handling Paper and Other Media | 2-9
Cutting Paper Manually with the Built-in Cutter
When you’re not using the Auto Cut setting, you need to cut the paper
manually after your print job is finished. If you’re printing on canvas, vinyl,
or other heavy media, you should use scissors or the optional utility cutter
rather than the built-in cutter. Heavy media can damage the built-in cutter.
Follow these steps to cut manually with the built-in cutter:
1. If the paper is not positioned correctly, press one of the
Paper
Feed
buttons to adjust the paper position. Normally, you don’t need to do
this after a print job is finished.
2. Press the
Paper
Source
button until the
Roll
Auto
Cut
light comes on.
3. Press the
Cut/Eject
button. The paper is cut.
Printing Trim Lines
You can have trim lines printed on the right edge of your images or pages (if
you’re using Auto Cut) or on the right and bottom edge (if you’re not using
Auto Cut). Follow these steps:
1. Press the
SelecType
button.
PRINTER SETTING MENU
appears on
the display.
2. Press the
Item
button until
PAGE LINE=OFF
appears on the display.
3. Press the
+
button.
PAGE LINE=ON
appears on the display.
4. Press the
Enter
button to save the new setting.
5. Press the
SelecType
button to exit the Printer Setting menu.
If you’re using the EPSON printer driver, you can also specify trim lines
through your print options. See page 3-3 (Macintosh) or page 4-7
(Windows) for more information.
Note
For information on how
to attach and use the
optional utility cutter, see
the documentation that
came with the cutter.
See page 2 for details on
ordering the manual
media cutting system.