Filter
Top Products
1
The EPSON Stylus Pro 10000 prints on a variety of media, including roll
paper and cut sheets up to 44 inches wide. You can also use heavy stock,
including posterboard up to 59 mil (1.5 mm) thick.
This chapter includes the following information:
•
Selecting media that meet your printer’s requirements
•
Printing on EPSON media
•
Using roll paper
•
Using cut sheet paper
•
Using the paper hammock
•
Setting paper configurations for non-EPSON media
Selecting Media That Meet Requirements
You can print on most types of coated, glossy, plain paper, and other media.
The printer comes with two 2-inch spindles, so you can have two types of
roll paper available for printing at all times (with manual switching).
High-tension spindles are also available (in both 2-inch and 3-inch
diameters), recommended for media such as EPSON Synthetic Paper and
Fine Art Paper.
The following table shows the paper requirements for your printer:
Always test samples of paper stock in the printer before purchasing large
quantities or printing large jobs. When you use non-EPSON papers or other
media, you may need to “profile” their thickness and ink drying time. See
page 2-18 for instructions.
Paper requirements
Roll paper Cut sheets
Size 8.3 to 44.02 in. wide
(210.8 to 1118 mm)
8.5 × 11 in. to 44 × 62.2 in.
(up to 1118 × 1580 mm)
Maximum
external roll
diameter
2 in. core: 4 in. (103 mm) when
using 2 rolls
3 in. core: 5.9 in. (150 mm)
when using 1 roll
—
Thickness 3.15 to 19.7 mil (0.8 to 0.5 mm) 3.15 to 59 mil (0.8 to 1.5 mm)
Chapter 2:
Handling
Paper and
Other Media
Note
You can purchase roll
paper spindles and
other accessories or
options from the EPSON
Pro Graphics web site
(http://prographics.epson.
com) or your authorized
EPSON dealer.