Epson StylusPro10000 Photo Printer User Manual


 
8
8 | Introduction
Place the printer near a wall outlet where the plugs can be easily
unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être
débranchée facilement.
Do not let the power cords become damaged or frayed.
If you use an extension cord with the printer, make sure the total ampere
rating of the devices plugged into the extension cord does not exceed the
cord’s ampere rating. Also, make sure the total ampere rating of all
devices plugged into the wall outlet does not exceed the wall outlet’s
ampere rating.
Except as specifically explained in the documentation, do not attempt to
service the printer yourself. Opening or removing those covers that are
marked “Do Not Remove” may expose you to dangerous voltage points
or other risks. Refer all servicing in those compartments to service
personnel.
Power down the printer from the control panel, unplug the printer and
refer servicing to qualified service personnel under the following
conditions:
If the power cord or plug is damaged; if liquid has entered the printer; if
the equipment has been dropped or the case damaged; if the printer does
not operate normally or exhibits a distinct change in performance.
Adjust only those controls that are covered by the operating instructions.
Ink Cartridge Safety Instructions
Do not put your hand inside the printer or touch the cartridges during
printing.
To avoid damaging the printer, do not move the print head by hand.
Under normal circumstances, ink will not come out of the cartridge. If it
does get on your skin, wash it off with soap and water. If it gets in your
eyes, flush them immediately with water.
Keep ink cartridges out of the reach of children and do not drink the
ink.
Do not store ink cartridges at high or freezing temperatures. Keep
cartridges away from direct sunlight.