IBM 31Y Security Camera User Manual


 
Symptom-to-FRU index 147
ServeRAID
For ServeRAID error codes and procedures, refer to the
Hardware Maintenance Manual for the particular RAID
adapter in the system being serviced.
Undetermined problems
You are here because the diagnostic tests did not identify
the failure, the Devices List is incorrect, or the system is
inoperative.
Note: A corrupt CMOS can cause undetermined problems.
If power problems are suspected:
1. Power-off the computer.
2. Be sure the system is cabled correctly.
3. Remove or disconnect the following (one at a time) until
you find the failure (power-on the computer and recon-
figure each time).
01298101
(Bad update data
for microprocessor
1)
1. Ensure all microprocessors
are the same stepping level
and cache size.
2. Microprocessor 1
01298102
(Bad update data
for microprocessor
2)
1. Ensure all microprocessors
are the same stepping level
and cache size.
2. Microprocessor 2
01298200
(Microprocessor
speed mismatch)
1. Ensure all microprocessors
are the same speed.
I9990301
(Fixed boot sector
error)
1. Hard Disk Drive
2. If RAID system, refer to the
Hardware Maintenance
Manual for the specific RAID
adapter.
3. SCSI Backplane
4. Cable
5. System Board
I9990305
(Fixed boot sector
error, no operating
system installed)
1. Install operating system to
hard disk drive.
I9990650
(AC power has
been restored)
1. Check cable
2. Check for interruption of
power supply
3. Power Cable
Other numbers Follow instructions on screen.
Error
Code/Symptom
FRU/Action