Open as PDF
34 Netfinity 3500-M20 – Type 8657 Models 21Y, 22Y, 31Y, 32Y,
Choices available from the
Configuration/Setup main menu
From the Configuration/Setup Utility main menu, you can
select settings that you want to change. The Configura-
tion/Setup Utility main menu is similar to the following:
1. You can press F1 to display Help information for a
selected menu item.
2. The choices on some menus might differ slightly,
depending on the BIOS version in the server.
Descriptions of the choices available from the main menu
are as follows:
• System Summary
Select this choice to display configuration information.
This includes the type and speed of the microproces-
sors and the amount of memory installed.
Changes that you make to configuration settings
appear on this summary screen. You cannot edit the
This choice appears on both the full and limited Config-
uration/Setup Utility menus.
• System Information
Select this choice to display information about the
server. Changes that you make on other menus might
appear on this summary screen. You cannot edit any
fields. The System Information choice appears only on
the full Configuration/Setup Utility main menu.
— Product Data
Select this choice to view system information,
such as the machine type and model, the server
serial number, and the revision level or issue date
of the BIOS stored in the flash electronically eras-
able programmable ROM (EEPROM).
• Devices and I/O Ports
IBM Netfinity Setup - © IBM Corporation 1998
<F1> Help < > < > Move
<Esc> Exit <Enter> Select
Devices and I/O Ports
Load Default Settings