Filter
Top Products
101
D 14049.01
07.2007
101
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
Firewall
Traversal
Configuring the VCS as a Traversal Client
Adding a New Traversal Client Zone
VCS Configuration > Zones.
You will be taken to the Zones page.
Select New.
You will be taken to the Create Zone page.
xCommand ZoneAdd
•
•
Name
Enter the name you wish to give to this zone.
The name acts as a unique identifier, allowing
you to distinguish between zones of the same
type.
Type
From the Type drop-down menu, select
TraversalClient.
Create Zone
Click here to create the zone. You will be
taken directly to the Edit Zone page, where
you can configure the traversal client zone as
required.
Overview
To enable your VCS to act as a traversal
client on behalf of its endpoints and neighbor
gatekeepers, you must create a connection
between it and a traversal server (e.g. a VCS
Border Controller).
You do this by adding a new traversal client
zone and configuring it with the details of the
traversal server.
You can create more than one
traversal client zone if you wish to
connect to multiple traversal servers.
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Firewall Traversal