TANDBERG D14049.01 Security Camera User Manual


  Open as PDF
of 187
 
D 14049.01
07.2007
130
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConguration
Authentication
cont...
LDAP AliasOrigin: <LDAP/Endpoint/Combined>
Determines which aliases (i.e. from the endpoint or the database) should be used to register the endpoint.
LDAP: the alias(es) presented by the endpoint will be used as long as they are listed in the LDAP database for the endpoint’s username.
Endpoint: the alias(es) presented by the endpoint will be used; any in the LDAP database will be ignored.
Combined: the alias(es) presented by the endpoint will be used in addition to any that are listed in the LDAP database for the endpoint’s username.
BaseDN: <S: 0, 255>
Species the Distinguished Name to use when connecting to an LDAP server.
Mode: <On/Off>
Determines whether or not to enforce authentication for H.323 and SIP registrations.
On: authentication is required.
Off: authentication is not required.
Password: <S: 0, 50>
Species the password to be used by the VCS when authenticating with another system.
UserName: <S: 0, 255>
Species the username to be used by the VCS when authenticating with another system.
Bandwidth Default: <64..2048>
Sets the bandwidth (in kbps) to be used on calls managed by the VCS in cases where no bandwidth has been specied by the endpoint.
Downspeed PerCall Mode: <On/Off>
Determines whether or not the system will attempt to downspeed a call if there is insufcient per-call bandwidth available to full the
request.
On: the system will attempt to place the call at a lower bandwidth.
Off: the call will be rejected.
Total Mode: <On/Off>
Determines whether or not the system will attempt to downspeed a call if there is insufcient total bandwidth available to fulll the
request.
On: the system will attempt to place the call at a lower bandwidth.
Off: the call will be rejected.
 previous next