TANDBERG D14049.01 Security Camera User Manual


 
D 14049.01
07.2007
146
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConguration
Zones
cont...
Zone [1..200]
cont...
Neighbor Alternate [1..5] Address: <S: 0, 128>
Species the IP addresses or FQDNs of any Alternates congured on this neighbor.
H323 Port: <1024..65534>
Species the port on the neighbor to be used for H.323 calls to and from this VCS.
Primary Address: <S: 0, 128>
Species the IP address or FQDN of this neighbor.
SIP Port: <1024..65534>
Species the port on the neighbor to be used for SIP calls to and from this VCS.
Transport: <TCP/TLS>
Determines which transport type will be used for SIP calls to and from this neighbor.
TCP: TCP will be used.
TLS: TLS will be used.
SIP Mode: <On/Off>
Determines whether SIP calls will be allowed to and from this zone.
On: SIP calls will be allowed.
Off: SIP calls will not be allowed.
TraversalClient Alternate [1..5] Address: <S: 0, 128>
Species the IP address or FQDN of any Alternates of the traversal server.
H323 Port: <1024..65534>
Species the port on the traversal server to be used for H.323 rewall traversal calls from this VCS.
Protocol: <Assent/H46018>
Determines which of the two rewall traversal protocols to use for calls to the traversal server when both are
available.
Assent: the Assent protocol will be used.
H46018: the H.460.18 protocol will be used.
Primary Address: <S: 0, 128>
Species the IP address or FQDN of the traversal server.
RetryInterval: <1..65534>
Species the interval in seconds with which a failed attempt to establish a connection to the traversal server should be retried.