Filter
Top Products
D 14049.01
07.2007
129
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConguration
Administration
HTTP Mode: <On/Off>
Determines whether HTTP calls will be redirected to the HTTPS port.
On: calls will be redirected to HTTPS.
Off: no HTTP access will be available.
HTTPS Mode: <On/Off>
Determines whether the VCS can be accessed via HTTPS. This must be On to enable both web interface and TMS access.
On: HTTPS access is enabled.
Off: HTTPS access is disabled.
SSH Mode: <On/Off>
Determines whether the VCS can be accessed via SSH and SCP.
On: SSH/SCP access is enabled.
Off: SSH/SCP access is disabled.
Telnet Mode: <On/Off>
Determines whether the VCS can be accessed via Telnet.
On: Telnet access is enabled.
Off: Telnet access is disabled.
TimeOut: <0..10000>
Sets the number of minutes that an administration session (HTTPS, Telnet or SSH) may be inactive before the session is timed out. A value of 0 turns session time outs off.
Alternates Alternate [1..5] Address: <S: 0, 128>
Species the IP address of an alternate VCS. Up to 5 alternates may be congured. When the VCS receives a Location Request, all alternates will also be
queried.
Authentication Credential
[1..2500]
Name: <S: 0, 255>
Denes the name for this entry in the local authentication database.
Password: <S: 0, 50>
Denes the password for this entry in the local authentication database.
Database: <LocalDatabase/LDAPDatabase>
Selects the database to be used for the storage of password information for authentication.
LocalDatabase: the local database will be used.
LDAPDatabase: a remote LDAP repository will be used.