Filter
Top Products
D 14049.01
07.2007
34
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
H.323 & SIP
Configuration
Working with H.323
Configuring H.323
H.323 settings are configured via:
VCS Configuration > Protocols > H.323.
You will be taken to the H.323 page.
xConfiguration H323
•
•
H.323 Mode
Determines whether or not the VCS will
provide H.323 gatekeeper functionality.
Auto discover
Determines whether or not the VCS responds
to gatekeeper discovery requests from
endpoints.
Call signaling TCP port
Specifies the port that listens for H.323 call
signaling.
Registration conflict mode
Determines how the system will behave if
an endpoint attempts to register an alias
currently registered from another IP address.
Reject: denies the registration.
Overwrite: deletes the original registration and
replaces it with the new registration.
Registration UDP port
Specifies the port to be used for H.323 UDP
registrations.
Call time to live
Specifies the interval (in seconds) at which
the VCS polls the endpoints in a call to verify
that they are still in the call.
Time to live
Specifies the interval (in seconds) at which an
H.323 endpoint must re-register with the VCS
in order to confirm that it is still functioning.
Call signaling port range end
Specifies the upper port in the range to
be used by H.323 calls once they are
established.
Call signaling port range start
Specifies the lower port in the range to
be used by H.323 calls once they are
established.
Save
Click here to save your changes.