Filter
Top Products
D 14049.01
07.2007
52
D 14049.01
07.2007
52
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
Zones and
Neighbors
Once you have created a new zone on the
local VCS you must configure it appropriately.
For traversal server zones, traversal client
zones and neighbor zones this will include
providing information about the neighbor
system such as IP address and ports.
Zones are configured via the Edit Zone page.
You will be taken to this page automatically
upon creation of a new zone. To access this
page for an existing zone:
VCS Configuration > Zones.
You will be taken to the Zones page.
Click on the name of the zone you wish to
configure.
You will be taken to the Edit Zone page.
xConfiguration Zones Zone
[1..200]
The sections that follow describe the
configuration options available for each zone
type.
•
•
Adding Zones
Name
Enter the name you wish to give to this zone.
The name acts as a unique identifier, allowing
you to distinguish between zones of the same
type.
Type
From the Type drop-down menu, select the
type of zone you wish to add.
Once the zone has been created, the Type
cannot be changed.
Create Zone
Click here to create the zone. You will be
taken directly to the Edit Zone page.
In order to neighbor with another system
(e.g. VCS, gatekeeper or Border Controller) or
create an ENUM or DNS zone, you must add
a new zone on the local VCS. When adding a
new zone you will be asked to specify its Type;
this will determine which configuration options
will then be available.
To create a new zone:
VCS Configuration > Zones.
You will be taken to the Zones page.
Click New.
You will be taken to the Create Zone page.
xCommand ZoneAdd
•
•
Configuring Zones
Cancel
Click here to return to the Zones page without
creating the zone.
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Managing Zones, Neighbors and Alternates