Filter
Top Products
D 14049.01
07.2007
77
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG
ADMINISTRATOR GUIDE
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Call
Processing
Alias Searching and Transforming
Zone transforms support the use of
Regular Expressions. See the
Appendix Regular Expression
Reference for more information.
Default Settings
When a new zone is created, by default
Match1 will be set to AlwaysMatch with a
Priority of 100. All remaining matches will be
set to Disabled. This means that the zone
will be queried for the original alias, with no
transforms applied.
Configuring Zone Searches and
Transforms
To configure when a zone will be searched and
any transforms that will be applied before the
search request is sent:
VCS Configuration > Zones.
You will be taken to the Zones page.
Click on the zone you wish to configure.
You will be taken to the Edit Zone page.
Scroll down until you get to the Match1
section.
xConfiguration Zones Zone
[1..200] Match [1..5]
You can configure up to five different Matches
(i.e. search/transform combinations) for each
zone.
•
•
Pattern behavior
(Applies only if the Mode is PatternMatch.)
Determines if and how the matched part of
the alias will be modified. Options are:
Leave: the alias will not be modified.
Strip: the matching prefix or suffix will be
removed from the alias.
Replace: the matching part of the alias will be
substituted with the text in the Replace String.
Pattern type
(Applies only if the Mode is PatternMatch.)
Determines the way in which the string must
match the alias. Options are:
Exact: the string must match the alias
character for character.
Prefix: the string must appear at the beginning
of the alias.
Suffix: the string must appear at the end of
the alias.
Regex: the string will be treated as a regular
expression.
Priority
Determines the order in which the zone
will be sent a search request. Zones with
priority 1 matches are searched first, followed
by priority 2, and so on. More than one
match can be assigned the same priority;
in this case the matches will be queried
simultaneously.
Replace string
(Applies only if the Mode is PatternMatch and
Pattern Behavior is Replace.)
Specifies the string to be used as a
substitution for the part of the alias that
matched the pattern.
Pattern string
(Applies only if the Mode is PatternMatch.)
Specifies the pattern against which the alias
is compared.
Mode
Determines if and when a query will be sent to
this zone. Options are:
AlwaysMatch: the zone will always be queried.
PatternMatch: the zone will only be queried
if the alias queried for matches the specified
Pattern String.
Disabled: the zone will never be queried.
Zone searching and alias transforming: configuration