Filter
Top Products
D 14049.01
07.2007
133
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConguration
H323
cont...
Gatekeeper
cont...
CallSignaling
cont...
TCP Port: <1024..65534>
Species the port that listens for H.323 call signaling.
CallTimeToLive: <60..65534>
Species the interval (in seconds) at which the VCS polls the endpoints in a call to verify that they are still in the call.
Registration ConictMode: <Reject/Overwrite>
Determines how the system will behave if an endpoint attempts to register an alias currently registered from another IP address.
Reject: denies the registration.
Overwrite: deletes the original registration and replaces it with the new registration.
UDP Port: <1024..65534>
Species the port to be used for H.323 UDP registrations.
TimeToLive: <60..65534>
Species the interval (in seconds) at which an H.323 endpoint must re-register with the VCS in order to conrm that it is still functioning.
Mode: <On/Off>
Determines whether or not the VCS will provide H.323 gatekeeper functionality.
On: the VCS will act as an H.323 gatekeeper.
Off: the VCS will not act as an H.323 gatekeeper.
Interworking Mode: <On/Off/RegisteredOnly>
Determines whether or not the VCS will act as a gateway between SIP and H.323 calls.
Off: the VCS will not act as a SIP-H.323 gateway.
RegisteredOnly: the VCS will act as a SIP-H.323 gateway but only if at least one of the endpoints is locally registered.
On: the VCS will act as SIP-H.323 gateway regardless of whether the endpoints are locally registered (you must have the appropriate option key enabled to use this feature).
IP Address: <IPAddr>
Species the IPv4 address of the VCS. Note: You must restart the system for any changes to take effect.
DNS Domain Name: <S: 0, 128>
Species the name to be appended to the host name before a query to the DNS server is executed. Used only when attempting to
resolve a domain name which is not fully qualied for NTP, LDAP, External Manager and Log servers.
Server [1..5] Address: <S: 0, 39>
Sets the IP address of up to 5 DNS servers to be used when resolving domain names.
Gateway: <IPAddr>
Species the IPv4 gateway of the VCS. Note: You must restart the system for any changes to take effect.