Filter
Top Products
D 14049.01
07.2007
115
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Bandwidth Control
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Bandwidth
Control
Editing Pipes
Editing an Existing Pipe
To configure details of a pipe:
VCS Configuration > Bandwidth > Pipes
You will be taken to the Pipes page.
Click on the pipe you wish to configure.
You will be taken to the Edit Pipe page.
xConfiguration Bandwidth Pipe
•
•
Name
Enter the name you wish to give to this pipe.
You will refer to this name when creating links.
Save
Click here to save the changes.
Total bandwidth mode
Determines whether there is a limit on the
total concurrent bandwidth of this pipe.
Unlimited: no limitations are in place.
Limited: there is a limit in place; you must
enter the limit in the field below.
None: there is no bandwidth available.
Total bandwidth (kbps)
Sets the limit on the total concurrent
bandwidth of this pipe.
Per call bandwidth mode
Determines whether there is a limit on the
bandwidth of individual calls via this pipe.
Unlimited: no limitations are in place.
Limited: there is a limit in place; you must
enter the limit in the field below.
None: there is no bandwidth available.
Per call bandwidth (kbps)
Sets the limit on the bandwidth of individual
calls via this pipe.
Bandwidth Control
Delete
Click here to delete the pipe.