Filter
Top Products
D 14046.01
07.2007
128
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Maintenance
Shutting Down
Restarting
Maintenance
About Restarting
Some configuration changes will require a restart of the system
to take effect. There will be a Restart button at the bottom of
any web pages that include such options. If you do not restart
the system after making these changes, you will receive a
warning telling you the system needs to be restarted.
Restarting will cause any active calls to be terminated.
There are two ways to restart the system:
Maintenance > Restart.
You will be taken to the Restart page.
xCommand Boot
•
•
Restart System
Click here to restart the
system.
!
Do not restart the
system while the red
ALM LED on the front
of the box is flashing.
About Shutting Down
The system must be shut down before it is unplugged.
Once the system has been shut down, the only way it can be
restarted is by pressing the soft power button on the unit itself.
You must therefore have physical access to the unit if you wish
to be able to restart it after shut down.
Shutting down will cause any active calls to be terminated.
To shut down the system:
Maintenance > Shutdown.
You will be taken to the Shutdown page.
•
Shutdown System
Click here to shutdown the
system.
!
Do not shutdown the
system while the red
ALM LED on the front
of the box is flashing.