Filter
Top Products
106
D 14049.01
07.2007
106
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
Firewall
Traversal
Configuring the VCS as a Traversal Server
Configuring Traversal Server Ports
The VCS has specific listening ports assigned
for connections with the firewall. In most
cases the default ports should be used.
However, you have the option to change these
ports if necessary.
To configure the VCS traversal server ports:
VCS Configuration > Border Controller >
Ports
You will be taken to the Ports page.
xConfiguration Traversal Server
Media
xConfiguration Traversal Server
H.323
•
•
•
Media demultiplexing RTP port
Specifies the port on the VCS to be used for
demultiplexing RTP media.
Media demultiplexing RTCP port
Specifies the port on the VCS to be used for
demultiplexing RTCP media.
H.323 Assent call signaling port
Specifies the port on the VCS to be used for
Assent signaling.
H.323 H.460.18 call signaling port
Specifies the port on the VCS to be used for
H.460.18 signaling.
Save
Click here to save your settings.
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Firewall Traversal