Filter
Top Products
D 14049.01
07.2007
18
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
System
Overview
Viewing System Overview
The Overview page summarizes the current
configuration and status of your system.
The Overview page opens automatically when
you first log on to the web interface.
You can also access it at any time by clicking
on the Overview link at the top left of the
page.
IPv6 address
This shows the VCS’s IPv6 address.
Traversal calls
Current: The number of traversal calls going
through the VCS at this moment.
Max (peak): The highest number of
concurrent traversal calls handled by the VCS
since it was last restarted.
Total: The total number of traversal calls
handled by the VCS since it was last
restarted.
Non-traversal calls
Current: The number of non-traversal calls
going through the VCS at this moment.
Max (peak): The highest number of concurrent
non-traversal calls handled by the VCS since it
was last restarted.
Total: The total number of non-traversal
calls handled by the VCS since it was last
restarted.
System name
This shows the name that has been assigned
to the VCS.
Software version
This shows the version of software that is
currently installed on the VCS.
IPv4 address
This shows the VCS’s IPv4 address.
Viewing the Overview Page
Understanding the Overview Page
Options
This shows all the additional options that are
currently installed on the VCS.
Registrations
Current: The number of endpoints registered
to the VCS at this moment.
Max (peak): The highest number of endpoints
concurrently registered to the VCS since it
was last restarted.
Total: The total number of registrations on the
VCS since it was last restarted.