Filter
Top Products
D 14049.01
07.2007
147
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConguration
Zones
cont...
Zone [1..200]
cont...
TraversalClient
cont...
SIP Port: <1024..65534>
Species the port on the traversal server to be used for SIP calls from this VCS.
Transport: <TCP/TLS>
Determines which transport type will be used for SIP calls to and from the traversal server.
TCP: TCP will be used.
TLS: TLS will be used.
TraversalServer Authentication UserName: <S: 1, 128>
If the traversal client is a VCS, this must be the VCS’s Authentication User Name. If the traversal client is a
gatekeeper, this must be the gatekeeper’s System Name.
H323 H46019 Demultiplexing Mode: <On/Off>
Determines whether the VCS will operate in Demulti-
plexing mode for calls from the traversal client.
On: allows use of the same two ports for all calls.
Off: Each call will use a separate pair of ports for
media.
Port: <1024..65534>
Species the port on the VCS being used for H.323 rewall traversal from this traversal client.
Protocol: <Assent/H46018>
Determines the protocol to be used for calls from the traversal client.
Assent: the Assent protocol will be used.
H46018: the H.460.18 protocol will be used.
SIP Port: <1024..65534>
Species the port on the VCS being used for SIP rewall traversal from this traversal client.
Transport: <TCP/TLS>
Determines which of the two transport types will be used for SIP calls between the traversal client and VCS.
TCP: TCP will be used.
TLS: TLS will be used.