Filter
Top Products
D 14049.01
07.2007
152
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xCommand
xCommand Description Parameters
LinkAdd
Adds and congures a new link.
LinkName(r): <S: 1, 50>
Assigns a name to this link.
Node1: <S: 1, 50>
Species the rst zone or subzone to which this link will be applied.
Node2: <S: 1, 50>
Species the second zone or subzone to which this link will be applied.
Pipe1: <S: 1, 50>
Species the rst pipe to be associated with this link.
Pipe2: <S: 1, 50>
Species the second pipe to be associated with this link.
LinkDelete
Deletes a link.
LinkId(r): <1..600>
The index of the link to be deleted.
Locate
Runs the VCS’s location algorithm to locate the endpoint
identied by the given alias, searching locally, on neighbors,
and on systems discovered through the DNS system, within
the specied number of “hops”. Results are reported back
through the xFeedback mechanism, which must therefore
be activated before issuing this command (e.g. xFeedback
register event/locate).
Alias(r): <S: 1, 60>
The alias associated with the endpoint you wish to locate.
HopCount(r): <0..255>
The hop count to be used in the search.
Protocol(r): <H323/SIP>
The protocol used to initiate the search.
OptionKeyAdd
Adds a new option key to the VCS.
Key(r): <S: 0, 90>
Species the key of the software option to be added.
OptionKeyDelete
Deletes a software option key from the VCS.
OptionKeyId(r): <1..64>
Species the ID of the software option to be deleted.