Filter
Top Products
7-5
Troubleshooting | 7-5
Paper Out
and
P
Operate
lights
flashing,
Ink Out
and
Paper
Size/Type
lights on, all paper tray
lights flash, and
H ink out lights are on
• Printer maintenance is required now. Turn off the printer and contact
EPSON as described on page 5.
All control panel lights flashing • An unknown error has occurred. Turn off the printer and remove any
foreign objects or paper that may be obstructing print head movement.
Then turn on the printer again. If you still see the error indicators, turn
off the printer and contact EPSON as described on page 5.
Your printer icon (
SPro 5500
) doesn’t
appear in the Macintosh Chooser.
• You may have too many items in the Chooser. Delete any unused items
and check the Chooser again.
Your computer doesn’t seem to
recognize the printer in Windows.
• Make sure that the Universal Serial Bus Controller is working properly
in Device Manager; see your computer documentation. If it is not
working, contact your computer dealer.
• If you connected your printer to a USB hub port, uninstall the printer
software (as described on page 7-7), connect the printer directly to a
USB port on your computer, and reinstall the software (as described in
Chapter 1).
• Make sure your system meets the requirements listed on page 4.
You turned the printer on and it is
making noise.
• Wait until the printer finishes testing and cleaning the print head before
you print. If the printer has been turned off for a while (for example,
over the weekend), it performs a longer cleaning cycle before printing.
This can take several minutes; do not turn off the printer during this
process.
If this happens: Try this: