Filter
Top Products
1-12
1-12 | Setting Up the Printer
Running a Printer Check
You can use the printer check to make sure that your printer is operating
correctly before you connect it to your computer.
1. Turn off the printer.
2. Make sure letter-size (or larger) paper is loaded in the main paper tray.
3. Hold down the
Reset
button and press the
P
Operate
button to turn
on the printer. Release the buttons when the
P
Operate
light begins
flashing.
After a few moments, the printer prints one page showing the version of
your printer’s ROM, a nozzle check pattern, and the printer’s default
settings, as shown below:
4. Press the
P
Operate
button to turn off the printer.
5. Check the printout.
•
If the printout looks like the example above, your printer is
operating correctly.
press to run a
printer check