Filter
Top Products
6
6 | Introduction
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure
you use the equipment safely and effectively.
•
Turn off and unplug the printer before cleaning. Clean with a damp
cloth only. Do not spill liquid on the printer.
•
Do not place the printer on an unstable surface or near a radiator or
heating vent.
•
Place the printer on a flat surface. It will not operate properly if it is
tilted or at an angle.
•
Do not block or cover the openings in the printer’s cabinet or insert
objects through the slots.
•
Use only the type of power source indicated on the label.
•
Connect all equipment to properly grounded power outlets. Avoid using
outlets on the same circuit as photocopiers or air control systems that
regularly switch on and off.
•
Place the printer near a wall outlet where the plug can be easily
unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être
débranchée facilement.
•
Do not let the power cord become damaged or frayed.
•
If you use an extension cord, make sure the total ampere rating of the
devices plugged into the extension cord does not exceed the cord’s
ampere rating. Also, make sure the total of all devices plugged into the
wall outlet does not exceed 15 amperes. Use of extension cords is not
recommended.
•
Except as specifically explained in the documentation, do not attempt to
service the printer yourself.
•
Unplug the printer and refer servicing to qualified service personnel
under the following conditions:
If the power cord or plug is damaged; if liquid has entered the printer; if
the equipment has been dropped or the cabinet damaged; if the printer
does not operate normally or exhibits a distinct change in performance.
Adjust only those controls that are covered by the operating instructions.