Filter
Top Products
1-2
1-2 | Setting Up the Printer
Follow these steps to unpack your printer and place it in a safe location:
1. Follow the instructions on the illustrated sheet in the box to remove the
tape and protective materials.
Save all packaging so you can use it if you need to transport the printer
later.
2. Place the printer on a flat, stable surface near a grounded outlet.
Do not use an outlet controlled by a wall switch or timer, or on the same
circuit as a large appliance. This may disrupt the power, which can erase
the printer’s memory and damage the power supply.
3. Leave plenty of room in back to access the manual feed slot and enough
room in front for removing the paper tray.
4. Do not put the printer:
•
In an area with high temperature or humidity
•
In direct sunlight or dusty conditions
•
Near sources of heat or electromagnetic interference, such as
loudspeakers or cordless telephone base units
If you purchased the optional lower paper cassette, you need to place the
printer on top of it. Follow the instructions in the next section.
Installing the Optional Lower Paper Cassette
The lower paper cassette provides an additional paper source so you can have
two different papers available for printing at all times. If you didn’t purchase
the optional lower cassette, skip to page 1-4 and install the standard paper
tray.
1. Unpack the cassette and paper tray. Follow the illustrated sheet in the
box to remove the tape and protective materials.
2. Place the cassette where you want to use the printer, with the paper tray
slot facing forward.
Note
Also be sure to follow all
the Safety Instructions
beginning on page 6.