Filter
Top Products
6-10
6-10 | Maintaining and Transporting the Printer
7. Press the
Eject/Continue
button (to move forward) or the
Reset
button
(to move backward) until the
H
ink out light(s) representing the
correctly aligned pattern come(s) on. See the table below.
For example, to select the correct alignment pattern 8 from the sample
above, press the
Eject/Continue
or
Reset
button until the yellow
H
ink
out light comes on.
8. Press the
Cleaning
button to enter your selection. The printer returns
to print head alignment mode.
9. If other numbered patterns on the first printout are misaligned (as
shown in step 3), repeat steps 2 through 9.
10. When you’re finished aligning the print head, press the
P
Operate
button to save the alignment setting and turn off the printer.
Ink out light indicators for correctly aligned pattern
Pattern # Black
H
HH
H
ink out
Cyan
H
HH
H
ink out
Magenta
H
HH
H
ink out
Yellow
H
HH
H
ink out
1On—— —
2 — On ——
3OnOn——
4 ——On —
5On— On —
6 — On On —
7OnOnOn—
8 ——— On
9On—— On
10 — On — On
11 On On — On
12 ——On On
13 On — On On
14 — On On On
15 On On On On