Filter
Top Products
6-14
6-14 | Maintaining and Transporting the Printer
If it’s not, turn the printer back on, wait until the print head stops
moving and is in the home position, then turn off the printer. After you
turn it off, the
P
Operate
light may flash for a while. Do not unplug
the power cord until the light goes off.
5. Unplug the power cord from the electrical outlet, then disconnect the
interface cable from the printer.
6. Remove the standard paper tray. If the optional lower paper cassette is
installed, remove the lower tray too.
7. If the optional lower paper cassette is installed, unscrew it and lift the
printer off of the cassette.
8. Insert the protective materials you removed when you unpacked the
printer.
Caution
The printer weighs
approximately 50 lb. Do
not try to lift or carry the
printer alone.