Filter
Top Products
1-19
DXC-D30WS/P(E)/V1
Chapter 2 Fitting and Connections
24
Chapter 2 Fitting and Connections
Fitting a VTR
3
Remove the VTR connection
plate.
4
Remove the DSR-1/1P’s
shoulder strap fitting and the
camera head connection plate.
5
Perform the first three steps in
“Fitting a VTR”.
6
Screw the connection plate
(supplied with the grip for the
DSR-130/130P) which
straddles the connection
between the camera head and
the DSR-1/1P. Also, tighten
the two screws in the shoulder
pad section. (See step
4
on
page 23.)
7
Screw the grip for the DSR-
130/130P.
VTR connection
plate
Grip for the DSR-130/130P
Connection
plate
Camera head
connection plate
Shoulder strap
fitting
Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections
25
Attaching a camcorder grip to the PVV-3/3P
Shoulder strap
fitting
Grip for the PVW-D30/D30P
1
Perform steps 2 to 4 in “Fitting
a VTR”.
2
If the viewfinder is attached,
adjust the viewfinder to the
full-forward position.
For details, see “Adjusting the
viewfinder position” on page 28.
3
Remove the grip’s three
screws, then pull up the grip to
remove it.
4
Remove the PVV-3/3P’s
shoulder strap fitting.
5
Screw the grip for the PVW-
D30/D30P.