Filter
Top Products
2-12
DXC-D30WS/P(E)/V1
• Page 1 RESET
• Page 2 Standing Correction
A SHAD
(YES )
B SHAD 123:
G SHAD 135:
R SHAD 118:
PAGE 2 (NEXT PREV )
EXIT MENU (YES )
• Page 3 Flare Adjustment
B FLARE 0:
G FLARE 0:
R FLARE 0:
PAGE 3 (NEXT PREV )
EXIT MENU (YES )
• Page 4 Pre Knee Setting
MPKNEE 1 67:
BPKNEE 128:
RPKNEE 128:
MPKNEE 4 255:
MPKNEE 3 164:
MPKNEE 2 116:
PAGE 4 (NEXT PREV )
EXIT MENU (YES )
The "RESET" mode is set to standard set
value except each board adjustment
values or differential adjustment values
by each unit. (Refer to table 1.)
* In the NTSC, move the cursor to
"DEST", select UC, then move the
cursor to "RESET", and push UP 4
switch.
PAGE 1 (NEXT PREV )
RESET
(YES )
DEST : UC
EXIT MENU (YES )
(for NTSC)
PAGE 1 (NEXT PREV )
RESET
(YES )
EXIT MENU (YES )
(for PAL)
A SHAD (This is not functioned.)
R SHAD / G SHAD / B SHAD
Stading correction of V
Standard (correction 0) = 128
Shoot the white portion of pattern box, adjust the UP 4 switch or
DOWN $ switch so that the waveform is flat on the oscilloscope
with VD period.
VA-185 board Test point
CL101 (Rch)
CL201 (Gch)
CL301 (Bch)
R FLARE / G FLARE / B FLARE
Flare correction
(Not corrected at 0)
Regarding the adjustment, see the "SECTION 3 ALIGNMENT."
Standard value
MPKNEE1 Usual Master Pre Knee Point (D range 600 %) : 67
MPKNEE2 Master Pre Knee point at _3dB gain (D range 425 %) : 116
MPKNEE3 Master Pre Knee point at FM mode (D range 300 %) : 164
MPKNEE4 Master Pre Knee point at _3dB gain and FM mode
(D range 212 %) : 255
RPKNEE Rch Pre Knee Point fine Adjustment : 128
BPKNEE Rch Pre Knee Point fine Adjustment : 128