Filter
Top Products
CGI Command Manual
10
Also, it is possible adjusting the frame rate by setting the "speed" or "interval" parameter when client
application requests bit stream.
<Method>
GET
<Syntax>
http://ip_adr/mjpeg[?speed=<value>]
http://ip_adr/mjpeg[?interval=<value>]
<Parameters>
speed=<value>
Refer to the following list regarding speed=<value>. The "fastest" frame rate is selected if there is no
specification of "speed" or "interval" parameters. Setting both "speed" and "interval" parameters is not
allowed.
interval=<value>
The range of setting parameter is from 33 to 3600000. The unit of the parameter is "millisecond". It is
possible to set the motion image interval by setting "interval" parameter. Setting both "speed" and
"interval" parameters is not allowed.
The effective value of speed parameter
Ｖａｌｕｅ
Ｄｅｔａｉｌｓ
0
1
2
3
4
5
6
8
10
15
20
25
30
Fastest
1 frame/sec
2 frame/sec
3 frame/sec
4 frame/sec
5 frame/sec
6 frame/sec
8 frame/sec
10 frame/sec
15 frame/sec
20 frame/sec
25 frame/sec
30 frame/sec