Filter
Top Products
CGI Command Manual
26
9 Configuration command for motion object detection or unattended
object detection
These are to be used for configuring motion detection. Common configuration terms are described in 9.1.
Inquiring the configuration is described in 9.2.
9.1 Common configuration terms
This section describes common configuration terms. When using these commands, describe as the
following syntax <parameter>=<value>.
<Method>
GET / POST
<Syntax>
http://ip_adr/command/objectdetection.cgi?parameter=<value>
<Parameters>
Refer to Chapter "11. CGI commands list"
<Example>
Set "Alarm interval" of the unattended detection with half and an hour.
POST /command/objectdetection.cgi HTTP/1.1¥r¥n
Host: 192.168.1.1¥r¥n
Connection: Keep-Alive¥r¥n
Cache-Control: no-cache¥r¥n
Content-Length: 20¥r¥n
¥r¥n
Win1Mode=mask
<Response>
HTTP/1.1 204 No Content¥r¥n
Content-Type: text/plain¥r¥n
Date: Fri, 29 Jul 2005 17:33:58 GMT¥r¥n
Server: XXXX/X.XX¥r¥n
Accept-Ranges: bytes¥r¥n
Connection: Keep-Alive¥r¥n
Expires: Fri, 29 Jul 2005 17:33:56 GMT¥r¥n
Pragma: no-cache¥r¥n
Cache-Control: no-cache¥r¥n
Content-Length: 0¥r¥n
¥r¥n