Filter
Top Products
CGI Command Manual
99
SNT-EP154 ImAlmAud, ImAlmSensor<AI>, ImAlmTampering, ImAlmVmf
11.25 Edge storage
Parameter Value InqParm SetCGI Ver Note
EdgeStorage "on"/"off" edgestorage edgestorage.cgi 1.10 An EdgeStorage function is turned on and off.
EsOverWrite "on"/"off" edgestorage edgestorage.cgi 1.10 Record data are overwritten.
EsRecChMax "<ch>" edgestorage - 1.10 The max value of ch of EdgeRec<ch> is returned.
EsRec<ch>Func "on"/"off" edgestorage edgestorage.cgi 1.10 On and off of every channel are specified.
EsRec<ch> "<codec>,<audio>" edgestorage edgestorage.cgi 1.10
<codec> ："image1/image2/image3"
<audio> ："on/off"
EsRec<ch>Mode "always"/"alarm" edgestorage edgestorage.cgi
1.10 The always record mode and the alarm interlock record mode
are chosen.
EsRec<ch>Period "always"/"schedule" edgestorage edgestorage.cgi 1.10 A record schedule method is specified.
EsRec<ch>Schedule "<schedule>" edgestorage edgestorage.cgi
1.10 The schedule when "schedule" is chosen in EsRec<ch>Period
is specified.
EsRec<ch>Status "0"/"1" edgestorage - 1.10 It is indicate whether it is during the record.
EsRec<ch>Start "on" - edgestorage.cgi 1.10 A record is started.
EsRec<ch>Stop "on" - edgestorage.cgi 1.10 A record is stoped.
EsAlmRec<ch>WatchAddress "<ip addr>" edgestorage edgestorage.cgi 1.10 <ip addr> : An IP address or a host name is specified.
EsAlmRec<ch>Trigger "<cond>" edgestorage edgestorage.cgi
1.10 The trigger condition of the alarm interlock record mode is
established. A detection factor ("sensor<AI>", "disconnected",
"vmf", "vmd", "tampering", "aud") or Cond<n> is specified in
cond.
EsRTSPRec<ch>Timeout "0" to "600" edgestorage edgestorage.cgi 1.10