Filter
Top Products
CGI Command Manual
68
SNT-EX104 SerSrcCamId, SerTermination
SNT-EX154 SerSrcCamId, SerTermination
The Serial CGI commands cannot be used with the following models.
♦ SNC-CH110/120/140/160/180/210/220/240/260/280
♦ SNC-DH110/110T/120/120T/140/140T/160/180/210/210T/220/220T/240/240T/260/280
♦ SNT-EP104/154
11.10 Network
Parameter Value InqParm SetCGI Ver Note
PhySpeed "10"/"100" network network.cgi 1.00 It is the communication speed of Ethernet.
PhyDuplex "full"/"half" network network.cgi 1.00 It is the communication form of Ethernet.
PhyAutonego "on"/"off" network network.cgi 1.00 Auto negotiation becomes effective when this is on.
PhyStat "100full"/"100half"/"10full"/"10half" network - 1.00 A state of communication of Ethernet is acquired.
PhyMdi "MDI"/"MDI-x"/"AutoMDI" network network.cgi 1.00
PhyMdiStat "MDI"/"MDI-x" network - 1.00
Dhcp "on"/"off" network network.cgi 1.00 An IP address is acquired from the DHCP server.
DnsAuto "on"/"off" network network.cgi 1.00
An IP address of domain name server is acquired from the DHCP
server.
Ip "<ip addr>" network network.cgi 1.00 Set IP address.
Subnetmask "<ip addr>" network network.cgi 1.00 Set sub net mask.
Gateway "<ip addr>" network network.cgi 1.00 Set default gateway.
MacAddress "<mac addr>" network - 1.00 Return the MAC address.
PrimaryDns "<ip addr>" network network.cgi 1.00 Set primary domain name server.
SecondaryDns "<ip addr>" network network.cgi 1.00 Set secondary domain name server.
HostName "<host name>" network network.cgi 1.00 Set host name.