Filter
Top Products
CGI Command Manual
32
id : display camera ID only
idtim : display time & camera ID
tim : display time only
custom : display the text defined by SiFormat
off : disable superimpose
(For the convertible) This setup becomes effective only when
SiEnable is "off". When this CGI is except for "off", the designation of
SiFormat which it prepares for the interchange, SiPosition and
SiFontSize becomes effective, and an item about the superimposition
becomes invalid. Contents are indicated in the position where it was
specified with SiPosition when this CGI is specified in "custom" and
the one except for "off". A superimposition is made non-indication
when it is set up in "off".
SiFormat "<text>" system system.cgi 1.00
Superimposed format in the Upper Left placement on the picture.
(For the convertible) A setup becomes effective when the value of
SuperimposeFunc is "custom". It can be specified including the tag to
sixty characters. (All can't be sometimes indicated by the screen
width and the size of the font.)
SiPosition "0"to"6" system system.cgi 1.00
(For the convertible) A superimposition display position is chosen.
The contents specified with SuperimposeFunc or SiFormat are
objects.
0: Top-left, 1: Top-right, 2: Bottom-left, 3: Bottom-right,
4: Top, 5: Bottom, 6: Center
SiFontSize
SiFontSizeImage1
SiFontSizeImage2
"0"/"1"/"2" system system.cgi 1.12
Size of superimposed font.
0 : Small, 1 : Middle(Large) 2: Large (Value 2 can be used with
SNC-CH120/160/210/220/260 and