Filter
Top Products
CGI Command Manual
5
via an equipped line output connector.
4) Still image request commands
These are to be used to get a latest still image from the camera.
5) Setting commands of camera
These are to be used to set picture quality and so on.
6) Inquiry commands of camera parameters
These are to be used to inquire various settings of camera parameters which can be set by
using setting commands (6).
7) Control commands for Panning, Tilting Zooming and Focusing
These are to be used for Panning, Tilting, Zooming and Focusing. Network Camera supports these
commands. And, when a connected analog camera has a function, SNT-EX101/101E/104/154 supports
some of the commands.
8) Configuration command for motion detection
These are to be used for configuring motion detection.
9) Information request commands
This is to be used to get information such a result of motion detection or status of the sensor input.
In this document, the usage of CGI commands such as "method", "syntax", and several examples are
explained below. The following model can't acquire audio data. And, audio can't be output, either.
SNC-CH110/120/160/210/220/260
SNC-DH110/110T/120/120T/160/210/210T/220/220T/260
SNT-EP104/154