Filter
Top Products
CGI Command Manual
67
11.9 Serial
Parameter Value InqParm SetCGI Ver Note
SerType
SNC-RH124/164, SNC-RS44/46/84/86：
"tcpip"/"visca"/"pelco-d"
SNT-EX101/101E/104/154：
"normal"/"tcpip"
serial serial.cgi
1.00
SerTcpPort "1024"to"65535" serial serial.cgi 1.00
SerBaudRate "2"to"7" serial serial.cgi 1.00 2:1200, 3: 2400, 4:4800, 5:9600, 6:19200, 7:38400 (bps)
SerCharLen "7"/"8" serial serial.cgi 1.00
SerParityBit "none"/"odd"/"even" serial serial.cgi 1.00
SerStopBit "1"/"2" serial serial.cgi 1.00
SerStandard
SNC-RH124/164, SNC-RS44/46/84/86:
"rs232c"/"rs485"/"rs422"/"rs485fd"
SNT-EX101/101E: "rs485"/"rs422"
SN-EX104/154: "rs485"
serial serial.cgi
1.00
SerProtocol
"pelco-d"/"ad"/"pelco-p"/"bosch"/
"vicon"/"panasonic"/"ge"/"visca"
serial serial.cgi
1.2
SerTermination "on"/"off" serial serial.cgi 1.00
SerDstCamId "1"to"256" serial serial.cgi 1.00
SerSrcCamId "1"to"256" serial serial.cgi 1.00
The command which can't be used in each model is shown in the following table.
Model name Unsupported command (Serial)
SNC-RH124/164 SerDstCamId, SerProtocol
SNC-RS44/46/84/86 SerDstCamId, SerProtocol
SNT-EX101/101E SerSrcCamId, SerTermination