Filter
Top Products
CGI Command Manual
44
VisibleTiltRange "<min pos>,<max pos>" ptzf - 1.10 An indication range is returned.
ContinuousPanTiltZoom
"<pan speed>,<tilt speed>,<zoom
speed>,<codec>"
- ptzf.cgi 1.12
pan speed: "-100" to "100"
tilt speed: "-100" to "100"
zoom speed: "-100" to "100"
PtzfMode "normal"/"step" camera camera.cgi 1.00
RelPanTilt "1"to"10" camera camera.cgi 1.00
RelZoom "1"to"10" camera camera.cgi 1.00
AutoFlip "off"/"0"/"250"/"500"/"750" camera camera.cgi 1.00
It is the setup of the time of AutoFlip (msec).
SNT-EX101/101E/104/154 is always "off".
AutoFlipMode "mechaflip"/"eflip" camera - 1.00 Return the kind of AutoFlip.
EflipFunc "0"/"1" camera - 1.00
Eflip "on"/"off" camera camera.cgi 1.12
SolidPTZ
SolidPTZ1
SolidPTZ2
"on"/"off" camera camera.cgi 1.12 The solid PTZ function is turned on and off.
SolidPTZMode "quality"/"rate" camera camera.cgi 1.12 This sets up SolidPTZ priority.
SolidPTZTiltDirection "up"/"down" camera camera.cgi 1.3
It is the direction of the coordinate of AbsolutePanTilt.
"up"：It is the same as Rapid Dome Camera.
"down"：It is the same even as the firmware V1.2.
AnalogCamPanSpeed "<speed>" ptzf ptzf.cgi 1.2 speed: "0"～"100"
AnalogCamTiltSpeed "<speed>" ptzf ptzf.cgi 1.2 speed: "0"～"100"
AnalogCamZoomSpeed "<speed>" ptzf ptzf.cgi 1.2 speed: "0"～"8"
AnalogCamFocusSpeed "<speed>" ptzf ptzf.cgi 1.2 speed: "0"～"8"
SerialDirect "<Serial-DirectData>" - ptzf.cgi 1.2
The contents of <Serial-DirectData> are transferred to the analog
camera.