Filter
Top Products
CGI Command Manual
56
"full"/"shutter"/"iris"/"manual"
SNC-CH140/180/220/240260/280
SNC-DH140/140T/180/220/220T/2
40/240T/260/280：
"autoirislens"/"manualirislens"
BLComp "on"/"off" camera camera.cgi 1.00 It is the setup of the backlight compensation.
DynaView "on"/"off" camera camera.cgi 1.00
ViewDR "on"/"off" camera camera.cgi 1.00
The View-DR (Visibility enhanced wide Dynamic Range) function
becomes effective.
VisibilityEnhancer "high"/"mid"/"low"/"off" camera camera.cgi 1.00
XDNR "high"/"mid"/"low"/"off" camera camera.cgi 1.00
VideoNoiseReduction "on"/"off" camera camera.cgi 1.12 The noise of the image is decreased.
AutoShutter "on"/"off" camera camera.cgi 1.00 Shutter speed is controlled automatically.
Shutter "0" to "21" camera camera.cgi 1.00
Set shutter speed. This is effective when ExpMode is shutter or manual.
The value which can be established varies according to the model. Refer
to Appendix.
AutoSlowShutter "on"/"off" camera camera.cgi 1.00 Turn on or off auto slow shutter.
AutoSlowShutterMinSpeed "0" to "6" camera camera.cgi 1.00 Refer to Appendix.
AutoShutterMaxSpeed "0" to "21" camera camera.cgi 1.30
The upper limit of the shutter speed is set up. The value which can be
established is the same as Shutter.
AutoShutterMinSpeed "0" to "21" camera camera.cgi 1.30
The lower limit of the shutter speed is set up. The value which can be
established is the same as Shutter.
Iris "0" to "17" camera camera.cgi 1.00 Set Iris. This is effective when ExpMode is iris or manual.
Irismove "open"/"close"/"stop" - camera.cgi 1.00 The state of Iris is controlled.
Agc "on"/"off" camera camera.cgi 1.00 Gain is controlled automatically.