Filter
Top Products
CGI Command Manual
19
6 Setting commands of camera parameters
Set various settings for the camera. When using these commands, describe as the following syntax
<parameter>=<value>. It is possible to transmit several parameters at one time only when they belong to
the same CGI name (The part of <cgi> of Syntax). In this case, it is necessary to insert "&" between each
<parameter>=<value>.
<Method>
GET/POST
<Syntax>
http://ip_adr/command/<cgi>?<parameter>=<value>[&<parameter>=<value>...]
<Parameters>
Refer to Chapter "11. CGI command list".