Filter
Top Products
CGI Command Manual
53
camera restarts a RTSP server.
M4FrameRate "<framerate>" camera camera.cgi 1.00
Set frame rate of MPEG-4 Frame Rate (fps)
0(fastest), 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30
Setting Command and Inquiry Command are invalid when "mpeg4" isn't
specified in ImageCodec.
M4BitRate "64" to "2048" camera camera.cgi 1.00
Set bitrates (kbps) of MPEG-4. (from 64 to 2048)
Setting Command and Inquiry Command are invalid when "mpeg4" isn't
specified in ImageCodec.
M4IFrameInterval "1"to"5" camera camera.cgi 1.00
Set I-Frame interval in second.
0: I-Frame interval is specified by the M4IFrameRatio parameter.
Setting Command and Inquiry Command are invalid when "mpeg4" isn't
specified in ImageCodec.
M4AutoRateCtrl "on"/"off" camera camera.cgi 1.00
Enable or disable the adaptive rate control for MPEG-4.
Setting Command and Inquiry Command are invalid when "mpeg4" isn't
specified in ImageCodec.
M4InsertIFrame "on" - camera.cgi 1.00
This parameter does not effect into this camera.
Setting Command are invalid when "mpeg4" isn't specified in
ImageCodec.
JpFrameRate "<framerate>" camera camera.cgi 1.00
Set frame rate of JPEG (fps)
0(fastest), 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30
Setting Command and Inquiry Command are invalid when "jpeg" isn't
specified in ImageCodec.
JpQuality "0"to"10" camera camera.cgi 1.00
"1" is lowest quality and "10" is highest quality.
"0" activates "JpTargetRatio"
Setting Command and Inquiry Command are invalid when "jpeg" isn't
specified in ImageCodec.